Vdo WR X1 User Manual download pdf (Page 145)

X1 VDO CYCLECOMPUTING14

GB SLO PL JP

JP PL SLO GB

www.vdocyclecomputing.com X1 15

You can program the values on the distance coun-

ter at any time (e.g. at the end of a season).

Using go to SETTINGS/

SELECT. Conﬁrm with

You are now in setting mode

(pressing

for 3 seconds gets

you back to function mode).

Using go to ODOMETER/

SET. Conﬁrm with

5.4 Setting the total kilometres

ODOMETER/ODO BIKE 1

(use to go to setting for

BIKE 2). Conﬁrm with

ODO BIKE 1 ...SET DISTANCE/

CONTINUE.

You can set the ﬂashing digits

using .

To access the next digit, con-

ﬁrm with

. Repeat the steps

until the last digit on the right

is ﬂashing. Conﬁrm with

ODO BIKE 1/SET OK? Conﬁrm with

The display conﬁrms ODO BIKE 1/SET DONE.

Automatic return to SETTINGS/SELECT.

5.5 Switch from bike 1 to bike 2

Your VDO computer can be used on two bikes.

If you switch from bike 1 to bike 2, you must set the

computer to the bike being used before the ride.

Using go to SETTINGS/

SELECT. Conﬁrm with

You are now in setting mode

(pressing

for 3 seconds gets

you back to function mode).

Using go to BIKE/SELECT

Conﬁrm with

BIKE 1 (use to switch to

bike 2). Conﬁrm with

BIKE 1 /SELECT OK? Conﬁrm with

The display conﬁrms BIKE/SELECT DONE

Automatic return to SETTINGS/SELECT

The selected bike 1 or 2) is

shown on the display bottom

left. ( )

ATTENTION, important note: When switching

from bike 1 to 2 or vice versa, the data for day‘s

tripdistance, ride time, average speed and max.

speed for the last trip are set to zero.

5.6 Service interval display

How to set the service interval:

Using go to SETTINGS/

SELECT. Conﬁrm with

You are now in setting mode

(pressing

for 3 seconds gets

you back to function mode).

Using go to BIKE SERVICE/

SET. Conﬁrm with

BIKE SERVICE/ON (switch to OFF

using ). Conﬁrm with

The VDO service interval display reminds you to

have your bike checked in the workshop.

You can switch the service interval ON or OFF.

You can set separate service intervals for 2 bikes

When the set service interval distance has been

reached:

The -symbol ﬂashes on the display.

The information line displays

BIKE SERVICE/BIKE 1

You should now either carry out the

recommended bike check yourself or

have the bike checked by your dealer.

Press any button. The text BIKE SERVICE

disappears again. After another 50 km

the also disappears. You can also switch

off the ﬂashing -symbol.

To do so, enter the service interval again.

1 2 ... 140 141 142 143 144 145 146 147 148 149 150 ... 241 242

Comments to this Manuals

No comments

Vdo WR X1 User Manual Page 145

Comments to this Manuals

Related products and manuals for For bicycles Vdo WR X1