VDO CD9303UB-CV Owner's Manual download pdf (Page 7)

Radio

쮿 Radio

Manual tuning (2) [TUNE]-button

To manually tune to a radio station, turn encoder

[TUNE]-button (2) left or right to increase or decre-

ase the radio frequency.

Up/Down seek [↑](7), [↓](18)

To automatically select a radio station, press the

SEEK UP button (18) or SEEK DOWN button (7)

once. The tuner will search for the next radio sta-

tion.

[AM/FM]-button (4)

Each time you press button (4), LCD displays as

follows :

[TA/AF]-button (5)

If you wish to hear traffic news, press button (5)

once. The display shows “TPSEEK”and “TA” icon

on LCD panel and search the traffic station. When

TA RDS signal is available from the current station,

TP icon is turned on. If the TA function is activated,

CD(USB) mode is also interrupted for traffic news.

Every time pressand hold button (5) longer than 2

seconds, the “AF”icon is display On and Off. When

“AF”on (“AF”icon will appear on the display panel.),

the unit automatically switches to the frequency

with the best reception and displays the station

which transmit an AF signal.

In areas with very poor reception, there may be

long paused while the radio attempts to find a bet-

ter frequency. In this case, you can deactivate the

AF function.

[1] - [6] Station preset button (8) ~ (13)

Whilst in radio mode, pressing buttons (8) to (13)

for less than 2 seconds will recall the radio station

that memory. To store desired stations into any of

the 6 pre-set memories, in either the AM or FM

bands, use the following procedure:

a. Select the desired station.

b. Press and hold any of the pre-set buttons for lon-

ger than 2 seconds. The pre-set number will

appear on the display panel indicating that the sta-

tion is now set into that pre-set memory position.

FM1 FM2 FM3 AM1 AM2



Note:

• Radio reception

You may experience frequency inter-

ference and static during normal radio re-

ception if items such as mobile phone

chargers, vehicle convenience accessori-

es, and external electronic devices are

plugged intothe accessory power outlet. lf

there is interference or static, unplug the

item from theaccessory power outlet.

•AM

The range for most AM stations is greater

than for FM, especially at night. The lon-

ger range can cause station frequencies

to interfere with each other. For better ra-

dio reception, most AM radio stations will

boostthe power levels during the day, and

then reduce these levels during the night.

Static can also occur when things like

storms and power lines interfere with ra-

dio reception. When this happens, try re-

ducing the treble on your radio.

•FM Stereo

FM stereo will give the best sound, but

FM signals will reach only about 10 to 40

miles (16 to 65 km). Tall buildings or hills

can interferewith FM signals, causing the

sound to fade in and out.

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Comments to this Manuals

No comments

VDO CD9303UB-CV Owner's Manual Page 7

Comments to this Manuals

Related products and manuals for Car media receivers VDO CD9303UB-CV